Plasma Air Ster Sterilizer FY PL-150G

Applicable room volume: ≤150 m³

Power supply: AC 220V±22V

Power supply frequency: 50HZ±1HZ

Input power: ≤160W

Overall dimensions: 5403001690 mm

Operation mode: Human-machine co-existence, cyclic disinfection, program control.

The outer surface is flat and smooth, without sharp edges, burrs, cracks and other defects. The spray - painted parts are bright, with uniform color, without peeling, sagging and scratch phenomena. The plastic parts are smooth, without cracking and deformation phenomena. The text marks are clear and accurate, and each control key is sensitive and reliable.

The wireless remote controller of the sterilizer can control on/off, time adjustment and wind speed adjustment, and its wireless remote control distance is not less than 5M.

Timing selection: The timing key of the remote controller can set a stepping amount of 1-24 hours, and the disinfection time can be selected according to the user's needs.

The power switch can clearly identify on and off, and is indicated by words or numbers. The power switch is indicated by "1" for on and "0" for off. The timing switch has a digital time indication.

Cyclic disinfection air volume: ≥1200 m³/h

The noise during the operation of the sterilizer ≤ 50 db(A)13. The electron density of the plasma electric field is 2.4210¹⁸ m⁻³ - 1.1510¹⁹ m⁻³, and the amount of negative ions ≥ 3*10⁷ particles/m³. (Provide test report)

 In the air disinfection effect test, the killing rate of Staphylococcus albus (strain 8032) is ≥ 99.9%, and the extinction rate of natural bacteria is ≥ 90%. (Provide test report)

 The ozone amount in the air during disinfection ≤ 0.1 mg/m³. (Provide test report)

 Within 2 hours, the number of dust particles ≥ 0.5 µm in the air of the disinfected room is ≤ 3,520,000 particles/m³, and the number of dust particles ≥ 5 µm is ≤ 29,300 particles/m³; measured by a third - party laboratory, the indoor air cleanliness after 2 - hour operation at high wind speed meets the Class 100,000 requirement. (Provide test report)

The service life of the plasma generator ≥ 25,000 hours.

It has a program - controlled timing function, and the on and off time of the sterilizer can be preset. It has a total machine running time accumulation function.

 It has a filter screen cleaning reminder function.

It has an automatic alarm function for motor failure.

It has a touch-type manual start-up function.

 When the plasma electric field is not working or the dust collection module is full of dust and affects work efficiency, it has an automatic alarm function.

The display screen adopts the LED back-lighting function, integrating the acrylic panel and the display screen, and applying various icon changes, which can better reflect the technological content.

This machine adopts three - gear wind speeds: low, medium and high.

The shell is made of cold - rolled sheet with spray-coating as the raw material, which is beautiful and generous, and safe to use.

This machine can effectively remove various harmful gases such as formaldehyde, ammonia, benzenes, TVOC, and hydrogen sulfide.