Haemodialysis Machine WL W-T2008-B

Configurations:The product is composed of circuit control system, monitoring system, blood extracorporeal circulation control system and hydraulic system, in which W-T6008S includes filter connector, replacement fluid connector, BPM and Bi-cart.

Intended use: 

W-T2008-B Hemodialysis Machine is used for HD dialysis treatment for adult patients with chronic renal failure in Medical Departments

See the instructions for details

Application Purpose of this Device

• W-T2008-B haemodialysis machine is applicable for chronic renal failure and other blood Purification treatment.
• This device should be used in medical units.
• This device is specially designed, produced and sold for renal failure patients to receive haemodialysis, which is not allowed to be used for other purposes.

Forms of Therapy:

Haemodialysis, Isolated Ultrafiltration, Sequential Ultrafiltration, Hemoperfusion, etc.

Features:

• Intelligent Double Operation System
• LCD touch screen with button interface
• Emergency power 30Mins (Optional)
• Blood Pump
• Spare Pump (for standby and also can be used for hemoperfustion).
• Heparin Pump
• Hydraulic compartment(Balance chamber + UF pump).
• Operation, Alarm information Memory function.
• A/B Ceramic proportion pump , High precision, Corrosion-proof, Accuracy.
• Introduction
• Size & Weight Size: 380mm×400mm×1380mm (L*W*H)
• Area: 500*520 mm
• Weight: 88KG
• Power Supply AC220V, 50Hz / 60Hz, 10A
• Input power: 1500W
• Back-up battery: 30 minutes (optional)
• Water input pressure: 0.15 MPa ～0.6 MPa
• 21.75 P.S.I. ～87 P.S.I.
• Water input temperature: 10℃～30℃
• Working environment: temperature 10ºC ～30ºC at relative humidity of no more than 70%.

Dialysate

　　Dialysate temperature: preset range 34.0℃～39.0℃

　　Dialysate flux: 300~800 ml/min

　　Dialysate concentration: 12.1 mS/cm ～16.0 ms/cm, ±0.1 ms/cm

　　Dialysate mixing ratio: can set variety ratio.

　　UF rate Flow range: 0 ml/h ～4000 ml/h

　　Resolution ratio: 1ml

　　Precision: ±30 ml/h

　　Extracorporeal Part

• Venous pressure: -180 mmHg ～+600 mmHg, ±10 mmHg
• Arterial pressure : -380 mmHg ～+400 mmHg, ±10 mmHg
• TMP pressure : -180 mmHg ～+600 mmHg, ±20 mmHg
• Blood pump flow range: 20 ml/min ～400 ml/min(diameter:Ф6 mm)
• Spare pump flow range: 30 ml/min ～600 ml/min(diameter:Ф8 mm)
• Resolution ratio: 1 ml
• Precision: error range ±10ml or 10% of reading

Heparin Pump

• Syringe size: 20, 30, 50 ml
• Flow range: 0 ml/h ～10 ml/h
• Resolution ratio: 0.1ml
• Precision: ±5%

Sanitize

• Hot decalcification
• Time: about 20 minutes
• Temperature: 30~60℃, 500ml/min.
• Chemical disinfection 
• Time: about 45 minutes
• Temperature: 30~40℃, 500ml/min.
• Heat disinfection :
• Time: about 60 minutes
• Temperature: >85℃, 300ml/min.
• Storage Environment Storage temperature should be between 5℃～40℃, at relative humidity of no more than 80%.

Monitoring System

Dialysate temperature: preset range 34.0℃～39.0℃, ±0.5℃

Blood leak detection: Photochromic

Alarm when erythrocyte specific volume is 0.32±0.02 or blood leak volume is equal or more than 1ml per liter of dialysate

Bubble detection:ultrasonic

Alarm when a single air bubble volume is more than 200µl at 200ml/min blood flow

Conductivity: acoustic-optic, ±0.5%